3D Printing Guidelines

Professional standards and best practices for achieving optimal results with Bambu Lab printers across the 3DreamFactory network.

Updated December 2024
Bambu Lab Certified
Quick Reference Settings
Recommended settings for common print scenarios

Standard Quality

Layer Height: 0.2mm

Infill: 15-20%

Speed: 100mm/s

Supports: Auto

High Quality

Layer Height: 0.1mm

Infill: 20-25%

Speed: 80mm/s

Supports: Manual

Fast Draft

Layer Height: 0.3mm

Infill: 10-15%

Speed: 150mm/s

Supports: Minimal

Layer Height Guidelines

0.1mm - Ultra Fine

For miniatures, jewelry, and highly detailed parts

0.15mm - Fine

Smooth surfaces with good detail retention

0.2mm - Standard

Best balance of quality and speed for most applications

0.3mm - Draft

Fast printing for prototypes and concept models

Infill Density Guidelines
5-10%Decorative items, vases
15-20%Standard parts, prototypes
25-40%Functional parts, tools
50-100%High-stress applications
Support Structure Guidelines

✓ Supports Required

  • • Overhangs greater than 45°
  • • Bridges longer than 10mm
  • • Floating geometry
  • • Complex internal structures

✗ Supports Not Needed

  • • Overhangs less than 45°
  • • Short bridges (under 5mm)
  • • Gradual curves
  • • Chamfered edges
3DreamFactory Quality Standards

Dimensional Accuracy

±0.1mm for features larger than 1mm

Surface Finish

Minimal layer lines, smooth surfaces

Structural Integrity

No delamination, proper layer adhesion

Post-Processing

Clean support removal, minimal cleanup required

Common Issues & Solutions
Troubleshooting guide for typical printing problems

❌ Common Problems

Layer Shifting

Reduce print speed, check belt tension

Stringing

Increase retraction, lower temperature

Warping

Use heated bed, add brim/raft

✅ Best Practices

Pre-Print Inspection

Check bed level, nozzle cleanliness

Material Storage

Keep filaments dry, sealed containers

Regular Maintenance

Clean nozzle, lubricate rails

Download Complete Guidelines

Get the full PDF version with detailed specifications and troubleshooting charts